Our needle stimulator is designed for acupuncture doctor carrying out clinical electric acupuncture treatment, applying low frequency pulse to stimulate the acupoints of human body.
Product Description
PRODUCT INTRODUCTION
Needle Stimulator (Model: CMNS6-2) develops from existing needle stimulator and can be
used in clinical treatment. It combines modern technology with traditional acupuncture
meridian theory, thus providing doctors with an easy-operated and portable device that can
offer electrical acupuncture treatment for patients.
This product applies to clinical electrical impulse acupuncture therapy.
The device has two working modes, high and low level. The former is for skin electrodes, its
rated load impedance is 500Ω; The latter is for filiform-needle electrodes, its rated load
impedance is 250Ω.This device consists of four parts -main device, skin electrodes,
Filiform-needle electrode clips, output wires
TECHNICAL SPECIFICATION
(1)Power Switch
(2)Intensity output jack
(3)High/low Switch Button
(4)Power adapter jack
(5)Battery compartment
(6)Channel selecting button
(7)Setting button
(8)Pause/ Running switch button
(9)Waveform button
(10)Switch
(11)Mute button
(12)Output indicator light
(13)Output intensity
adjusting knob
(14)Therapy time adjusting
button
(15)Output frequency
adjusting button
(16)LCD display
(17)Power indicator light
Main Technical Specifications
Output Pulse Wave: un-symmetry bi-direction triangular pulse wave
Pulse Frequency: frequency adjustable in 1-100Hz
Output Pulse width: 0.175ms
Output Peak voltage value: 70±10V(Load 500Ω)
Output Pulse channel: 6 channels
AC-DC converter(inputAC220, 50Hz/AC 110V, 60Hz, output DC9V)
Accessories
1.Output wire: 6 pcs
2.Self-adhesive electrode 50mm*50mm: 12 pcs
3.Exclusive clips: 12pcs(Length≤28mm)
4.Manual: 1pc
PRODUCT TECHNICAL PARAMETERS
Output waveform is asymmetric double triangle tip wave and output base wave is rectangular wave.
Output frequency: 1 HZ -100HZ adjustable( deviation±15%)
Impulse width: 0.175ms(deviation±30%)
Output voltage peak value: high level, 50 V ( allowable deviation ±30% 500 Ω rated load), only for skin electrode low level, 20 V (allowable deviation ±30% 250 Ω rated load),only for filiform-needle electrode
Output impulse channel: 6 channels
The device should have no DC component output
Effective values of max output current at 1000Ωand 250Ω load is not more than 10mA(r.m.s)
Timing : 1-99min(deviation±10%)
Power source: Alkaline battery R14/UM2×6,DC9V
or specific power adapter: model ABT005090. Input:220V~,50Hz, output: DC9V
500mA (recommend to use adapter complying with GB 9706.1)
Output waveform
a) continuous wave: 1Hz~100Hz adjustable
b) intermittent wave: frequency 1 HZ -100HZ adjustable. Interrupted wave time 5s±2s, continuous wave time 15±3s.
c) dilatational wave: frequency 1Hz~20Hz adjustable; dense wave 5Hz~100Hz adjustable; disperse time 5s±2s; dense time 10s±3s.
Skin electrode: 50mm×50mm,deviation±10%; electrical impedance170Ω,deviation±10%
Volume: 238 mm×184mm×75mm
Weight: approx. 657g
Note: 1) Frequency, impulse width and intensity vary with different mode.
2) Different impedance ( for skin electrode 500Ω,for Filiform-needle electrode
250Ω)has impact
Audited Supplier 
){kind=link}